Single Panel Guard – (Part # CV19-SPG-K)
$140.00
Quick Overview
The Single Panel Guard is used to prevent direct contact between the customer and the attendant. For use on counters that are at least 13 inches deep or more.
Main Panel: 30 inches wide x 42 inches in height.
Minor assembly required.
The surface can be cleaned with Windex and a cloth.
*Quantity pricing available for more than 10 units.
Triple Panel Guard with Transaction Opening – (Part # CV19-TPG-TO-K)
$147.00
Quick Overview
The Triple Panel Guard with Transaction Opening is used to prevent direct contact between the customer and the attendant. Great for counters that are not deep. Comes with transaction cutout, 5 inches high and 14 inches wide.
Main Panel: 30 inches wide x 42 inches in height.
No assembly necessary. Remove from box, open wings at any angle which will support center panel.
Hinges can be opened at any angle desired.
The surface can be cleaned with Windex and a cloth.
*Quantity pricing available for more than 10 units.
Manicure Triple Panel Guard – (Part # CV19-MTPG-TO-K)
$110.00
Quick Overview
The Manicure Guard is used to prevent direct contact between the customer and the manicurist. The guard sits securely with stabilizing clips on the counter. The guard can easily be removed from the stabilizers for storage if need be.
Main Panel: 24 inches wide x 31 inches in height.
No assembly is required.
The surface can be cleaned with Windex and a cloth.
*Quantity pricing available for more than 10 units.
Single Panel Guard with Angled Top and Transaction Opening – (Part # CV19-SPG-TO-AT-K)
$152.00
Quick Overview
The Single Panel Guard with Transaction Opening is used to prevent direct contact between the customer and the attendant. The angled top serves extra protection from air particles that travel upwards, especially after a sneeze. For use on counters that are at least 13 inches deep or more. Comes with transaction cutout, 5 inches high, and 14 inches wide.
Main Panel: 30 inches wide x 42 inches in height.
Minor assembly required.
The surface can be cleaned with Windex and a cloth.
*Quantity pricing available for more than 10 units.
Intubation Box – (Part # CV19-DHG)
$143.00
Quick Overview
“This helps protect clinicians without access to standard personal protective equipment during endotracheal intubation. The clear plastic cube covers the patient’s head and has two holes through which the clinician passes his or her hands to perform the procedure. During experiments with a simulated cough, only the inside of the box and the clinician’s gloves and gowned forearms were contaminated. Without the box, contamination was seen as far as 2 meters from the patient.”
https://www.jwatch.org/fw116520/2020/04/05/covid-19-update-aerosol-box-during-intubation-preventing
*Quantity pricing available for more than 10 units.
Cafeteria Guard – (Part # CV19-CG4-K)
$275.00
Quick Overview
The Cafeteria Guard is used to prevent direct contact between two or more people sitting at the same table when eating. While eating, masks are not worn, so it is important to be protected.
Main Panel: 16 inches wide x 31 inches in height.
Minor assembly required.
The surface can be cleaned with Windex and a cloth.
*Quantity pricing available for more than 10 units.
Single Panel Guard with Transaction Opening – (Part # CV19-SPG-TO-K)
$143.00
Quick Overview
The Single Panel Guard with Transaction Opening is used to prevent direct contact between the customer and the attendant. For use on counters that are at least 13 inches deep or more. Comes with transaction cutout, 5 inches high and 14 inches wide.
Main Panel: 30 inches wide x 42 inches in height.
Minor assembly required.
The surface can be cleaned with Windex and a cloth.
*Quantity pricing available for more than 10 units.
School Cafeteria Guard – (Part # CV19-CG4-K)
$275.00
Quick Overview
The Cafeteria Guard is used to prevent direct contact between two or more people sitting at the same table when eating. While eating, masks are not worn, so it is important to be protected.
Main Panel: 16 inches wide x 31 inches in height.
Minor assembly required.
The surface can be cleaned with Windex and a cloth.
*Quantity pricing available for more than 10 units.
Hands Free Foot Pedal Door Opener
$19.00
Quick Overview
Prevent the spread of COVID-19, reduce paper towel costs, open the door when your hands are full!
- QUALITY MATERIAL – Durable, precision-machined 1/8” powder-coated steel will not bend. A strong powder coating finish will not rust and is easy to clean. Proudly Made in the USA!
- INCLUDES – Hands-free foot pedal door opener, 3 hardened Wood Screws (optimal for attaching to wood or metal doors), door sign sticker (to provide awareness of the foot pedal), and installation instructions.
- SIMPLE – Do-it-yourself installation in less than 5 min, simply screw into door. The only tool needed is a drill and Philips bit. Works on any latch-less commercial wood or metal door. For restaurants, offices, stores, restrooms, or any public space.
- ADVANCED DESIGN – Taller back increases the strength of connection and reduces shear stress to screws. Smooth tooth pattern grabs sole of any style shoe without scratching it. The wide platform allows for maximum traction on shoes. Countersunk holes allow screws to be flush to the surface so they won’t catch on the toe. Light gray color hides dirt from shoes.
- SANITARY – Prevents the spread of COVID-19 by reducing the touching of contaminated surfaces. Helps keep your customers, employees, and yourself safe.
